BDCOM S5800 series is a new generation high-performance data center full Gigabit TOR switch oriented for cloud computing, data centers and high-end campus networks. S5800 series adopts an advanced hardware architecture design, providing the cutting-edge switching performance and rich data center service features.
Ups to 32-Port 100G QSFP28
Spine-Leaf Architecture
6.4T Switch Capacity
Comprehensive Data-center Functionalities
4K VLAN IDs
GVRP
1:1 and N:1 VLAN Mapping
QinQ and selective QinQ
Private VLAN
Manually configuring VxLAN tunnel
VxLAN distributed gateway
VxLAN dual-active link access
VxLAN interconnection across data centers
VxLAN pass-through of L2 Protocol packets
Supports modification of VxLAN outer header DSCP
BGP EVPN
Supports overlay split horizon, and separate control on different VNIs
IGMP v1/v2c/v3
IGMP Snooping
IGMP Fast Leave
Multicast group policy and multicast number limit
MVR
PIM-SM, PIM-DM
Static routing, RIP v1/v2, OSPF, BGP, IS-IS, BEIGRP
Policy Based Routing(PBR)
ECMP
BFD for OSPF, BGP
ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet
IPv6 neighbor discovery
Path MTU discovery
MLD v1/v2
MLD snooping
IPv6 Static Routing, RIPng, OSPFv3, BGP4+
Manual tunnel, ISATAP tunnel, 6-to-4 tunnel
MPLS Forwarding
MCE
MPLS OAM
MPLS Stats
L2VPN
L3VPN
Traffic classification based on fields in L2/L3/L4 protocol headers
Committed Access Rate (CAR) traffic restriction
Re-marking of 802.1P/DSCP priority
Multiple queuing algorithms such as SP, WRR or SP+WRR
Congestion avoidance mechanisms like Tail-Drop and WRED
Traffic supervision and traffic shaping
Ingress and Egress ACL, supports matching L2, L3, L4 and IP quintuples, and performs replication, forwarding and discarding
Hash-based load balancing algorithm to ensure session integrity
L2~L4 ACL flow identification and filtering security mechanism
DDoS attack prevention, TCPSYN/UDP Flood attack prevention
Suppression of multicast, broadcast, and unknown unicast packets
Port isolation Port Security, IP+MAC+port binding
DHCP Snooping, DHCP Option 82
IEEE 802.1x authentication
Radius, BDTacacs+
URPF
Command line hierarchical protection
Power 1+1 backup
Static/LACP link aggregation
EAPS, ERPS
HSRP, VRRP
GR for OSPF and BGP
BFD for OSPF and BGP
ISSU
Console, Telnet, SSH 2.0
Zero Touch Provisioning (ZTP)
Web-GUI
SNMP v1/v2c/v3
Upload and download of FTP/TFTP/SFTP files
RMON event history
Traffic statistical analysis such as sFLOW
IEEE 802.3az
MLAG basic functions
MLAG one-arm functions
Static configuration and dynamic MAC learning
MAC browsing and removal
Configurable aging time of the MAC address
Limited number of learnable MAC addresses
MAC filtration
Black-hole MAC list
IEEE 802.1AE MacSec
802.1d STP, 802.1w RSTP, 802.1s MSTP
BPDU protection, root protection and ring protection
Operating temperature/humidity: -10°C-50°C; 10%-90%noncondensing
Storage temperature/humidity: -20°C -70°C; 5%-95% noncondensing
S5800-E Series | |
---|---|
S5800-48X8C-E | 48-Port 10G SFP+ 8-Port 40/100G QSFP28 L3 Stackable Managed Switch (2 power slots with dual AC220V power supplies; 1U, 19-inch rack-mounted installation |
S5800-48Y8C-E | 48-Port 25G SFP28 + 8-Port 40/100G QSFP28 L3 Stackable Managed Switch (2 power slots with dual AC220V power supplies; 1U, 19-inch rack-mounted installation |
S5800-32C-E | 32-Port 40/100G QSFP28 L3 Stackable Managed Switch (2 power slots with dual AC220V power supplies; built-in fans with left and right air ducts, 1U, 19-inch rack-mounted installation |